Methodologic analysis of the normal strain σy y based on elastic deflection
The problem in determining the normal stresses (σ_x, σ_y, τ_xy) in a cross section using elastic deflection as a base, is based on the fact that the existing methodologies still have deficiencies in their analysis. The article presents an analysis of the normal stresses (σ_x, σ_y, τ_xy) developed fr...
Guardat en:
| Autors principals: | , , |
|---|---|
| Format: | Online |
| Idioma: | spa |
| Publicat: |
Universidad Autónoma de Baja California
2020
|
| Accés en línia: | https://recit.uabc.mx/index.php/revista/article/view/18 |
| Etiquetes: |
Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
|
| Sumari: | The problem in determining the normal stresses (σ_x, σ_y, τ_xy) in a cross section using elastic deflection as a base, is based on the fact that the existing methodologies still have deficiencies in their analysis. The article presents an analysis of the normal stresses (σ_x, σ_y, τ_xy) developed from the applied loads on the structural element and the development of an application case. Also, since the deflection of an element depends on the applied loads, then the stress analysis is based on the elastic deflection of the structural component. In addition, the selection of the structural element is based on the design regulations for beams for structural components. On the other hand, the analysis of the material to make a design of a structural component is also presented in this article. Likewise, the material will show wear due to the applied loads, then a fatigue analysis based on normal stresses is performed. |
|---|
@UABCInstitucional
UABC_Oficial
@UABC_Oficial
Tel: +52 686 551 82 00
cienciaabierta@uabc.edu.mx