Development of a mechatronic system for humanoid robot that allows to emulate the movement of the neck of human beings
The present work shows the design of a mechatronic system, which emulates the movements of the human neck, as it will support the head of a humanoid robot (Arthur) developed by Hanson Robotics. The mechanical design is based on a spherical robot of 3 degrees of freedom (3-GDL), the dynamic model is...
Αποθηκεύτηκε σε:
| Κύριοι συγγραφείς: | , , , , , |
|---|---|
| Μορφή: | Online |
| Γλώσσα: | spa |
| Έκδοση: |
Universidad Autónoma de Baja California
2019
|
| Διαθέσιμο Online: | https://recit.uabc.mx/index.php/revista/article/view/57 |
| Ετικέτες: |
Προσθήκη ετικέτας
Δεν υπάρχουν, Καταχωρήστε ετικέτα πρώτοι!
|
| Περίληψη: | The present work shows the design of a mechatronic system, which emulates the movements of the human neck, as it will support the head of a humanoid robot (Arthur) developed by Hanson Robotics. The mechanical design is based on a spherical robot of 3 degrees of freedom (3-GDL), the dynamic model is developed through the Euler-Lagrange equations of motion. The control stage is a FPGA (Field Programmable Gate Arrays) development board, the power stage is based on BJT transistors, the hyperbolic tangent controller and a WiFi communication interface are implemented to configure the robot From a PC with the help of Labview software. As a result, the integration of the mechatronic system, the interface developed together with the FPGA-PC communication and position control, is shown. Future work will be the implementation of the system in the humanoid robot. |
|---|
@UABCInstitucional
UABC_Oficial
@UABC_Oficial
Tel: +52 686 551 82 00
cienciaabierta@uabc.edu.mx